B12-25 Advanced Outdoor Pure Acrylic Latex Paint

This product is mainly prepared by acrylic copolymer, high performance pigments, fillers and auxiliaries. It features:

High adhesion	Easy to apply	Nontoxic & safe
Fast-drying	Alkali-resistant & waterproof	Scrub-resistant and anti-fouling

B12-25 Advanced Outdoor Pure Acrylic Latex Pain Video

B12-25 Advanced Outdoor Pure Acrylic Latex Pain 

Basic Technical Datasheet

Appearance	Custom colors, gloss
Density, kg/L	1.50
Volume  solid，%	37
Resistance to stain	≤20
Resistance to scrub,2000 times	No damage
Resistance to water, 96h	No change
Chalking, level	≤1
Resistance to artificial weathering, 250h	No blister, peeling, crack
Water permeability, mL	≤1.4
Resistance to alkali, 48h	No change
Drying time, min @23± 2℃	50
Dry film thickness, µm	33
Wet film thickness, µm	90
Theoretical spreading rate, m2/kg @ 33 µm dry film	7.5
VOC, g/L	0

B12-25 Advanced Outdoor Pure Acrylic Latex Paint Product Packaging Packaging: 25 kg in a 20-liter iron bucket. Shelf Life: 12 months If exceeding shelf life, the products shall be tested before using.

B12-25 Advanced Outdoor Pure Acrylic Latex Paint

Applicable Environment

Cement mortar	Asbestos board	Concrete	Roof

B12-25 Advanced Outdoor Pure Acrylic Latex Paint

Compatibility

	Product	Thickness
Primer:	B51-2 Advance Acrylic Latex Sealing Primer	2*40 µm
Topcoat:	B12-26 Advanced Outdoor Pure Acrylic Latex Paint	2*40 µm

B12-25 Advanced Outdoor Pure Acrylic Latex Paint

Finished Projects

 

B12-25 Advanced Outdoor Pure Acrylic Latex Paint

Production Process

B12-25 Advanced Outdoor Pure Acrylic Latex Paint

Instructions For Use

Substrate Treatment：

This product can be directly applied if the substrate is pre-coated with exclusive sealing primer for it or complex sculpture latex intermediate paint.

The surface must be dry and clean. Remove any form of laitance, grease or oil by using mechanical sandblasting.Repair defects on surface.

Instructions for Use:

• Thinner:

DI water or tap water (weight content ≤ 5 %, w./w.).

• Cleaner:

DI water or tap water

• Application method:

Spraying, brushing, rolling.

Air spraying: nozzle diameter: 2-3 mm, air pressure: 0.3-0.6 Mpa. Brush : Nylon / polyester.

Roller: 1/4 - 1/2" woven.

• Application coats:

Suggested 2 coats to 90 µm.

• Maintenance period:

≥ 7days.

B12-25 Advanced Outdoor Pure Acrylic Latex Paint 

Company Introduction

B12-25 Advanced Outdoor Pure Acrylic Latex Paint 

Exhibitions