Alkyd Vanish

This product is composed of  medium oil alkyd resin modified by dry vegetable oil, drier, special additive and mixed solvent, etc.It features great properties as：

Strong adhesion	Water resistance	Bright color
Curing at room temperature	Low-temperature drying

Alkyd Vanish Basic Technical Datasheet

Color	Transparent
Gloss	Glossy
Density	~0.95Kg/L(after mixing)
Solid Volume	(30±2 )%
Standard Film thickness	30um dry film thickness  (about 100um wet film thickness)
Theoretical spreading rate	10.5m²/Kg (60um dry film thickness)
Full cure	(23±2℃ )24h
Flash Point	35℃

Alkyd Vanish Product Packaging Packaging: 18 kg in a 20-liter iron bucket. Shelf Life: 12 months If exceeding shelf life, the products shall be tested before using.

Alkyd Vanish Applicable Environment

Indoor wooden decorative components	Metal hardware accessories	Wooden storage boxes/pallets	Surface of outdoor steel canopy

Alkyd Vanish Finished Projects

 

Alkyd Vanish Production Process

Alkyd Vanish Instructions For Use

Substrate Treatment：

All surface to be coated shall be clean and dry. The surface shall be evaluated and treated according to ISO8504 standard.

For bare steel, it shall be sandblasted to reach Sa2.5(iso8501-1:2007) standard. Depending on the environment of the non-immersed part, grinding with power tools is acceptable but shall at least reach St2(iso8501-1:2007) standard.

For shop primed steel, the shop primer shall be clean, dry and approved.

For surface painted coatings, this product can apply only to clean, dry and good compatible primer.

Instructions for Use:

Mixing：

Ready to use

Airless spray：

Nozzle tip: 0.017~0.023 inches

Spray pressure: 15~18 Mpa

Thinner ratio: 0~15% (by weight of paint)

Brush, Roller : Recommended Must achieve required thickness

Alkyd Vanish Company Introduction

Alkyd Vanish Exhibitions