Anti-static Solvent-free Self-leveling Epoxy Floor Paint

This product is composed of solvent-free modified epoxy resin, conductive metal powder and high quality curing agent.It has the following characteristics：

Smooth surface	Mirror effect	Excellent acid resistance
Alkali resistance	Chemical solvent resistance

Anti-static Solvent-free Self-leveling Epoxy Floor Paint Video

Anti-static Solvent-free Self-leveling Epoxy Floor Paint Basic Technical Datasheet

Color	Customized
Gloss	Glossy
Density	~1.32Kg/L(after mixing)
Hardness	Epoxy paint curing agent
Solid Volume	(98±2 )%
Standard Film thickness	1mm dry film thickness  (about 1.02mm wet film thickness)
Theoretical spreading rate	0.74m²/Kg (1mm dry film thickness)
Full Cure	(23±2℃ )7d
Flash Point	27℃

Anti-static Solvent-free Self-leveling Epoxy Floor Paint Product Packaging Packaging: part A：20 kg in a 20-liter iron bucket. part B：5 kg in a 6-liter iron bucket. Shelf Life: 12 months If exceeding shelf life, the products shall be tested before using.

Anti-static Solvent-free Self-leveling Epoxy Floor Paint Applicable Environment

Electronics factory	Assembly workshop	Electrical control room	Chemical plant
Laboratory	Warehouse	Hospital	Food factoryDust removal equipment

Anti-static Solvent-free Self-leveling Epoxy Floor Paint Compatibility

	Product	Thickness
Primer:	Epoxy Sealing Primer	1*30 µm (dry film thickness)
Midcoat:	Epoxy Putty Intermediate Paint	1~2 mm (dry film thickness)
Topcoat:	Anti-static Solvent-free Self-leveling Epoxy Floor Paint	1*1 mm (dry film thickness)

Anti-static Solvent-free Self-leveling Epoxy Floor Paint Finished Projects

Anti-static Solvent-free Self-leveling Epoxy Floor Paint Production Process

Anti-static Solvent-free Self-leveling Epoxy Floor Paint Instructions For Use

Substrate Treatment：

All surface to be coated shall be clean and dry. The surface shall be evaluated and treated according to ISO8504 standard.

For bare steel, it shall be sandblasted to reach Sa2.5(iso8501-1:2007) standard. Depending on the environment of the non-immersed part, grinding with power tools is acceptable but shall at least reach St2(iso8501-1:2007) standard.

For shop primed steel, the shop primer shall be clean, dry and approved.

For surface painted coatings, this product can apply only to clean, dry and good compatible primer.

Instructions for Use:

• Mixing:

Use the power mixer to mix the main paint evenly, and then as you stir it, you add the hardener until you get to mix well. Generally, if the temperature is below 10℃, it needs 30 min induction time; If the temperature is over 10℃, it needs 15 min induction time.

• Mixing ratio:

Part A: Part B=20:5

• Thinner:

Exclusive paint thinner

• Airless spray:

Nozzle tip: 0.020~0.028 inches

Spray pressure: 15~18Mpa

Thinner ratio: 0~15% (by weight of paint)

• BrushRoller:

Recommended

Must achieve required thickness

Anti-static Solvent-free Self-leveling Epoxy Floor Paint Company Introduction

Anti-static Solvent-free Self-leveling Epoxy Floor Paint Exhibitions