B12- 10 Advanced Interior Latex Paint

This product is mainly prepared by acrylic modified alkyd resin, pigments, drier, and organic solvent with better performance than regular alkyd paint in outdoor applications. It features:

Alkaline	Water	Scrub (over 2000 times)
Quick-drying	Easy to apply	Low-VOC formulation

B12- 10 Advanced Interior Latex Paint Video

B12- 10 Advanced Interior Latex Paint 

Basic Technical Datasheet

Appearance	Custom colors, flat sheen
Density, kg/L	~1.30
Volume solid, %	33
Flammability (solid, gas）	Not available
Solubility	Not available
Viscosity	Kinematic 40 ℃ : >0.205 cm2/s (>20.5 cSt)
VOC, g/L	≤200
Theoretical spreading rate, g/m2 @ 32 µm dry film	148

B12- 10 Advanced Interior Latex Paint Product Packaging Packaging: 25 kg in a 20-liter iron bucket or 180 kg in a 200-liter plastic drum. Shelf Life: 12 months If exceeding shelf life, the products shall be tested before using.

B12- 10 Advanced Interior Latex Paint 

Applicable Environment

Cement mortar	Plaster	Concrete	Masonry

B12- 10 Advanced Interior Latex Paint Compatibility

	Product	Thickness
Putty:	B51-3 Exclusive Putty for Architectural Paint	1mm
Primer:	B51-2 Advance Acrylic Latex Sealing Primer	0.1mm
Topcoat:	B12- 10 Advanced Interior Latex Paint	0.2mm

B12- 10 Advanced Interior Latex Paint Finished Projects

B12- 10 Advanced Interior Latex Paint 

Production Process

B12- 10 Advanced Interior Latex Paint 

Instructions For Use

Substrate Treatment：

Remove all surface contamination by washing with an appropriate cleaner, rinse thoroughly and allow to dry. Existing peeled or checked paint should be scraped and sanded to a sound surface. Glossy surfaces should be sanded dull. Stains from water, smoke, ink, pencil, grease, etc. should be sealed with the appropriate primer/sealer. Recognize that any surface preparation short of total removal of the old coating may compromise the service length of the system. 

Drywall：

Fill cracks  and  holes with  patching  paste/  spackle  and sand smooth. Joint compounds must be cured and sanded smooth. Remove all sanding dust.

Masonry, concrete, cement, block:

All new surfaces must be cured according to the supplier’s recommendations usually about 30 days.  Remove all form  release  and curing  agents.  Rough surfaces can be filled to provide a smooth surface. If painting cannot wait 30 days, allow the surface to cure 7 days and prime the surface with JIANBANG Concrete &Masonry Primer/Sealer.

Instructions for Use:

Thinner：

DI water or tap water (weight content ≤ 5 %, w./w.).

Cleaner：

DI water or tap water

Application methods:

Spraying, conventional spraying, brushing, rolling, troweling.

Spraying: nozzle diameter: 2-3 mm, air pressure: 0.3-0.6 Mpa.

Brush: Nylon / polyester.

Roller: 3/8" - 3/4" nap synthetic cover.

Maintenance period:

7 days.

B12- 10 Advanced Interior Latex Paint 

Company Introduction

B12- 10 Advanced Interior Latex Paint Exhibitions