B51-2 Advance Acrylic Latex Sealing Primer

This product is mainly prepared by acrylic copolymer, pigments and auxiliaries.This lasting product appears rich and beautiful look. Also, it is fast-drying, easy to apply, and low VOCformula.

Odorless & nontoxic	Easy to apply	Excellent permeability
Over 2000 times scrub resistance	waterproof and mildew-proof	Alkali resistance

B51-2 Advance Acrylic Latex Sealing Primer Video

B51-2 Advance Acrylic Latex Sealing Primer 

Basic Technical Datasheet

Color	Cream white
Density, kg/L	1.01
Volume solid, %	9.1
Adhesion, grade	≤1
Low temperature stability	No deterioration
Water resistance ,h	≤96
Saltpetering resistance,h	≥72
Alkali resistance,h	≥48
Water permeability,mL	≤0.3
Salting-out resistance,h	≥144
VOC, g/L	≤200
Theoretical spreading rate, m2/kg     @ 60 µm dry film	15

B51-2 Advance Acrylic Latex Sealing Primer Product Packaging Packaging: 25 kg in a 20-liter iron bucket or 180 kg in a 200-liter plastic drum. Shelf Life: 12 months If exceeding shelf life, the products shall be tested before using.

B51-2 Advance Acrylic Latex Sealing Primer 

Applicable Environment

Cement mortar	Plaster	Concrete	Masonry

B51-2 Advance Acrylic Latex Sealing Primer Compatibility

	Product	Thickness
Putty:	B51- 1Architectural Paint Exclusive Putty	1mm
Primer:	B51-2 Advance Acrylic Latex Sealing Primer	0.1mm
Topcoat:	B12-25 Advanced Outdoor Pure Acrylic Latex Paint	0.2mm

B51-2 Advance Acrylic Latex Sealing Primer Finished Projects

B51-2 Advance Acrylic Latex Sealing Primer 

Production Process

B51-2 Advance Acrylic Latex Sealing Primer 

Instructions For Use

Substrate Treatment：

The surface must be solid, clean and dry, free from efflorescence, dust,oils and other contaminants. Also, the surface PH must be lower than 10.

Deteriorated previous coatings, weak, friable & blistered paints or chalky substances should be removed and then smooth it thoroughly.

If any, rinse moldy walls with hot bleaching agent for 10 minutes, and then flush it with tap water thoroughly. Apply this product within 48 hours after surface dried.

Instructions for Use:

Thinner：

DI water or tap water (weight content ≤1 %, w./w.).

Application method:

Brushing or rolling.

Brush :. Nylon / polyester.

Roller:1/4 - 1/2" woven.

Maintenance period:

7 days.

B51-2 Advance Acrylic Latex Sealing Primer 

Company Introduction

B51-2 Advance Acrylic Latex Sealing Primer 

Exhibitions