B52- 12 Acrylic Modified Alkyd Paint

This  product  is  mainly  prepared  by acrylic  modified  alkyd  resin,  pigments, drier, and organic solvent with better performance than regular alkyd paint in outdoor applications. It features:

High hardness	Great adhesion	Wide compatibility
Easy to apply	Good weather resistance	Chemical corrosion resistance

B52- 12 Acrylic Modified Alkyd Paint Video

B52- 12 Acrylic Modified Alkyd Paint 

Basic Technical Datasheet

Color	Custom
Density, kg/L	~1.15
Flash point,℃	35
Fineness	≤40
Solid  content	≥50%
Hardness	≥0.2
Impact resistance, cm	50
Bending test,mm	≤3
Adhesion, MPa	≥5
Bending test, mm	2
Resistance to water, 8h	No change
Resistance to oil, 4h	No change
Resistance to acid(10g/L H2SO4 ),24h	No change
Theoretical spreading rate, kg/m2 @ 35 µm dry film	0.16
VOC, g/L	420

B52- 12 Acrylic Modified Alkyd Paint Product Packaging Packaging: 22 kg in a 20-liter iron barrel. Shelf Life: 12 months If exceeding shelf life, the products shall be tested before using.

B52- 12 Acrylic Modified Alkyd Paint 

Applicable Environment

Machinery	Steel cable tower	Train carriages	Agricultural vehicles
Tower crane	Boats &shipyard	Outdoor billboard	Stadium seats

B52- 12 Acrylic Modified Alkyd Paint Compatibility

	Product	Thickness
Primer:	C06-1 Alkyd Primer	2*40 µm
Topcoat:	B52-12 Acrylic Modified Alkyd Paint	2*40 µm

B52- 12 Acrylic Modified Alkyd Paint Finished Projects

B52- 12 Acrylic Modified Alkyd Paint 

Production Process

B52- 12 Acrylic Modified Alkyd Paint 

Instructions For Use

Substrate Treatment：

All surface shall be clean, dry and free from any contaminations to achieve long lasting function.

      Primed surfaces

The primer surface should be dry and free from all contaminations.

If paint is peeling or badly weathered, clean surface to sound substrate and treat as a new surface as above.

Instructions for Use:

Thinner

X-6 alkyd paint thinner ≤ 10 % w./w.

Cleaner

X-6 alkyd paint thinner

Application methods:

Airless spray (recommended): Nozzle tip: 0.017-0.023 inch, minimum 150 bar/2100 psi.

Brush: recommended for small areas only.

Roller: recommended for small areas only.

B52- 12 Acrylic Modified Alkyd Paint 

Company Introduction

B52- 12 Acrylic Modified Alkyd Paint Exhibitions