B55-60 Elastic Outdoor Solvent-based Paint

This product is mainly prepared by elastic acrylic copolymer, modified resin, pigments and fillers, and auxiliaries. It features:

Solid & durable	Good mechanical	resistant to heat and cold
resistant to ozone & ultraviolet rays	Chemical corrosion resistance	Keep elasticity with temperature range -25℃-80℃

B55-60 Elastic Outdoor Solvent-based Paint Video

B55-60 Elastic Outdoor Solvent-based Paint 

Basic Technical Datasheet

Appearance	Custom color, semi-gloss
Density, kg/L	1.00
Flash point, ℃	29
Tensile strength, Mpa	≥1.0
Elongation,%	≥150
Resistance to stain	≤20
Resistance to scrub,2000 times	No damage
Resistance to water, 96h	No change
Chalking, level	≤1
Resistance to artificial weathering, 250h	No blister, peeling, crack
Water permeability, mL	≤1.4
Resistance to alkali, 48h	No change
dry film thickness, μm	25
wet film thickness, μm	100
Mature period, min	10
Pot life, h	12
Theoretical spreading rate, m2/kg @ 25µm dry film	5.2
VOC,g/L	~400

B55-60 Elastic Outdoor Solvent-based Paint Product Packaging Packaging: Part A: 18kg in a 20- Liter iron bucket Part B: 3.6kg in a 3.7-Liter iron bucket. Shelf Life: 12 months If exceeding shelf life, the products shall be tested before using.

B55-60 Elastic Outdoor Solvent-based Paint

Applicable Environment

Cement mortar	Asbestos board	Concrete	Wooden board

B55-60 Elastic Outdoor Solvent-based Paint

Compatibility

	Product	Thickness
Primer:	B51- 1 Solvent-based Sealing Primer	100 µm
Topcoat:	B55-60  Elastic Outdoor Solvent-based Paint	2*40 µm

B55-60 Elastic Outdoor Solvent-based Paint 

Finished Projects

B55-60 Elastic Outdoor Solvent-based Paint 

Production Process

B55-60 Elastic Outdoor Solvent-based Paint 

Instructions For Use

Substrate Treatment：

This product can be directly applied if the substrate is pre-coated with exclusive sealing primer for it or complex sculpture latex intermediate paint.

The surface must be dry and clean. Remove any form of laitance, grease or  oil  by  using  mechanical  sandblasting.  Repair  any  constructional weaknesses.

Instructions for Use:

Thinner：

Exclusive paint thinner ≤ 10 % w./w.

   Cleaner:

Exclusive paint thinner

   Application methods:

Spraying, brushing, rolling.

Airless spray (recommended)：  Nozzle tip: 0.015-0.021 inch, minimum 150 bar/2100 psi.

Brush: recommended for small areas only.

Roller: recommended for small areas only.

    Maintenance period

≥7 days.

    Application coats

3~4 coats to 80-100µm.

B55-60 Elastic Outdoor Solvent-based Paint 

Company Introduction

B55-60 Elastic Outdoor Solvent-based Paint 

Exhibitions