YMS
Light yellow
No gloss
~1.2Kg/L (after mixing)
15℃
(45±2 )%
Use the power mixer to mix the main paint evenly, and then as you stir it, you add the hardener until you get to mix well.
Part A: Part B = 18:4 (by weight)
12.5m²/Kg (100um dry film thickness)
Availability: | |
---|---|
Epoxy Chlorosulfonated Cross-linked Anti-corrosive Paint
This product is a two-component cross-linked anti-corrosive paint composed of chlorosulfonated polythene rubber, epoxy resin, stabilizer, organic solvent, etc.It has the following resistance characteristics:
|
|
|
Epoxy Chlorosulfonated Cross-linked Anti-corrosive Paint Basic Technical Datasheet
Color | Customized |
Gloss | Semi-gloss |
Density | ~1.25Kg/L (after mixing) |
Hardness | Epoxy chlorosulfonation paint curing agent |
Solid Volume | (50±2 )% |
Standard Film thickness | 60um dry film thickness (about 120um wet film thickness) |
Theoretical spreading rate | 6.67m²/Kg (60um dry film thickness) |
Flash Point | 27℃ |
![]() | Epoxy Chlorosulfonated Cross-linked Anti-corrosive Paint Product PackagingPackaging: part A:20kg in a 20-liter iron bucket. part B:5kg in a 6-liter iron bucket. Shelf Life: 12 months If exceeding shelf life, the products shall be tested before using. |
![]() | ![]() | ![]() | ![]() |
Electrical Equipment | Pipelines | Chemical Equipment | Cooling Tower |
![]() | ![]() | ![]() | ![]() |
Wharf | Reservoir | Steel Tower | Wastewater Pond |
Product | Thickness | |
Primer: | Epoxy Iron Oxide Red Primer | 2*40 µm (dry film thickness) |
Paint: | Epoxy Chlorosulfonated Cross-linked Anti-corrosive Paint | 2*30 µm (dry film thickness) |
![]() | ![]() | ![]() |
![]() | ![]() | ![]() |
Substrate Treatment:
The surface to be coated shall be clean, dry and free from contaminations. Also, the surface shall be evaluated and treated according to ISO8504 standard.
Bare steel: sandblasting to reach Sa2.5(IOS8501-1:2007). For the non-soaking site, acceptable for power tool grinding, at least reach St2(IOS8501-1:2007).
Instructions for Use:
Mixing:
Use the power mixer to mix the main paint evenly, and then as you stir it, you add the hardener until you get to mix well.
Thinner:
Exclusive thinner for epoxy chlorosulfonation paint
Airless spray:
Nozzle tip: 0.017~0.023 inches
Spray pressure: 15~18Mpa
Thinner ratio: 0~10% (by weight of paint)
Brush、Roller:
Recommended Must achieve required thickness
![]() | |||
![]() | ![]() | ![]() | ![]() |
![]() | ![]() | ![]() |
![]() | ![]() | ![]() |
Epoxy Chlorosulfonated Cross-linked Anti-corrosive Paint
This product is a two-component cross-linked anti-corrosive paint composed of chlorosulfonated polythene rubber, epoxy resin, stabilizer, organic solvent, etc.It has the following resistance characteristics:
|
|
|
Epoxy Chlorosulfonated Cross-linked Anti-corrosive Paint Basic Technical Datasheet
Color | Customized |
Gloss | Semi-gloss |
Density | ~1.25Kg/L (after mixing) |
Hardness | Epoxy chlorosulfonation paint curing agent |
Solid Volume | (50±2 )% |
Standard Film thickness | 60um dry film thickness (about 120um wet film thickness) |
Theoretical spreading rate | 6.67m²/Kg (60um dry film thickness) |
Flash Point | 27℃ |
![]() | Epoxy Chlorosulfonated Cross-linked Anti-corrosive Paint Product PackagingPackaging: part A:20kg in a 20-liter iron bucket. part B:5kg in a 6-liter iron bucket. Shelf Life: 12 months If exceeding shelf life, the products shall be tested before using. |
![]() | ![]() | ![]() | ![]() |
Electrical Equipment | Pipelines | Chemical Equipment | Cooling Tower |
![]() | ![]() | ![]() | ![]() |
Wharf | Reservoir | Steel Tower | Wastewater Pond |
Product | Thickness | |
Primer: | Epoxy Iron Oxide Red Primer | 2*40 µm (dry film thickness) |
Paint: | Epoxy Chlorosulfonated Cross-linked Anti-corrosive Paint | 2*30 µm (dry film thickness) |
![]() | ![]() | ![]() |
![]() | ![]() | ![]() |
Substrate Treatment:
The surface to be coated shall be clean, dry and free from contaminations. Also, the surface shall be evaluated and treated according to ISO8504 standard.
Bare steel: sandblasting to reach Sa2.5(IOS8501-1:2007). For the non-soaking site, acceptable for power tool grinding, at least reach St2(IOS8501-1:2007).
Instructions for Use:
Mixing:
Use the power mixer to mix the main paint evenly, and then as you stir it, you add the hardener until you get to mix well.
Thinner:
Exclusive thinner for epoxy chlorosulfonation paint
Airless spray:
Nozzle tip: 0.017~0.023 inches
Spray pressure: 15~18Mpa
Thinner ratio: 0~10% (by weight of paint)
Brush、Roller:
Recommended Must achieve required thickness
![]() | |||
![]() | ![]() | ![]() | ![]() |
![]() | ![]() | ![]() |
![]() | ![]() | ![]() |