Mastic Asphalt

Mastic asphalt for lining is also known as cold asphalt mastic. It is composed of mastic mixed finish, mastic silver finish.It has the following characteristics：

Good moisture resistance	Thermal insulation	Flame retardancy
Corrosion resistance	Suitable for anti-corrosion protection of thermal insulation projects

Mastic Asphalt Basic Technical Datasheet

Color	Black
Gloss	Glossy or no gloss
Density	~1.35Kg/L(after mixing)
Hardness	Exclusive curing agent for fluorocarbon paint
Solid Volume	(65±2 )%
Standard Film thickness	100um dry film thickness  (about 155um wet film thickness)
Theoretical spreading rate	4.81m²/Kg (100um dry film thickness)
Full Cure	(23±2℃ )24h
Flash Point	27℃

Mastic Asphalt  Product Packaging Packaging: 22 kg in a 20-liter iron bucket. Shelf Life: 12 months If exceeding shelf life, the products shall be tested before using.

Mastic Asphalt Applicable Environment

Storage tank exterior anti-corrosion	Underground pipeline	Pipeline anti-corrosion & thermal insulation projects	Marine engineering

Mastic Asphalt Classical coating system

Product	Thickness
Mastic Asphalt	2*50 µm (dry film thickness)

Mastic Asphalt Finished Projects

Mastic Asphalt Production Process

Mastic Asphalt Instructions For Use

Substrate Treatment：

All surface to be coated shall be clean and dry. The surface shall be evaluated and treated according to ISO8504 standard.

For bare steel, it shall be sandblasted to reach Sa2.5(iso8501-1:2007) standard. Depending on the environment of the non-immersed part, grinding with power tools is acceptable but shall at least reach St2(iso8501-1:2007) standard.

For shop primed steel, the shop primer shall be clean, dry and approved.

For surface painted coatings, this product can apply only to clean, dry and good compatible primer.

Instructions for Use:

• Mixing:

Ready to use

• Thinner:

Exclusive thinner for mastic asphalt

• Airless spray:

Nozzle tip: 0.025~0.031 inches

Spray pressure: 18~28Mpa

Thinner ratio: 5~15% (by weight of paint)

• BrushRoller:

Recommended

Must achieve required thickness

Mastic Asphalt Company Introduction

Mastic Asphalt Exhibitions