Polyurethane Mica Iron Oxide Intermediate Paint

Polyurethane Mica Iron Oxide Intermediate Paint is a two-component intermediate paint composed of hydroxyl epoxy resin, anti-rust pigments and fillers, auxiliaries and PAPI polyisocyanate as curing agent. It features great properties as：

Thick coating	Good barrier property	Fast drying
Oil resistance	Excellent intercoat adhesion between primer and topcoat

Polyurethane Mica Iron Oxide Intermediate Paint Basic Technical Datasheet

Color	Gray, reddish-brown
Gloss	Flat, glossy
Density	~1.55Kg/L (after mixing)
Hardness	Polyurethane curing agent
Solid Volume	(55±2 )%
Standard Film thickness	100um dry film thickness (about 180um wet film thickness)
Theoretical spreading rate	3.55m²/Kg (100um dry film thickness)
Flash Point	Part A: 32℃ Part B: 27℃

Polyurethane Mica Iron Oxide Intermediate Paint Product Packaging Packaging: Part A：20 kg in a 20-liter iron bucket. Part B：4 kg in a 5-liter iron bucket. Shelf Life: 12 months If exceeding shelf life, the products shall be tested before using.

Polyurethane Mica Iron Oxide Intermediate Paint Applicable Environment

Port crane	Transmission/communication tower	Industrial workshop	Guardrail steel structure
Wind turbine tower	Bridge steel structure	Outdoor canopy	Storage rack steel structure

Polyurethane Mica Iron Oxide Intermediate Paint Finished Projects

 

Polyurethane Mica Iron Oxide Intermediate Paint Production Process

Polyurethane Mica Iron Oxide Intermediate Paint Instructions For Use

Substrate Treatment：

All surface to be coated shall be clean and dry. The surface shall be evaluated and treated according to ISO8504 standard.

For bare steel, it shall be sandblasted to reach Sa2.5(iso8501-1:2007) standard. Depending on the environment of the non-immersed part, grinding with power tools is acceptable but shall at least reach St2(iso8501-1:2007) standard.

For shop primed steel, the shop primer shall be clean, dry and approved.

For surface painted coatings, this product can apply only to clean, dry and good compatible primer.

Instructions for Use:

Mixing：

Use the power mixer to mix the main paint evenly, and then add the hardener and stir until it is well mixed.

Thinner: Polyurethane thinner

Airless spray：

Nozzle tip: 0.017~0.023 inches

Spray pressure: 15~18 Mpa

Thinner ratio: 5~15% (by weight of paint)

Brush, Roller : Recommended Must achieve required thickness

Epoxy Mica Iron Oxide Intermediate Paint Company Introduction

Epoxy Mica Iron Oxide Intermediate Paint    Exhibitions