Chlorinated Rubber Thick Paste Finish

This product is composed of chlorinated rubber, polymer synthetic resin, thixotropic agent, plasticizer, pigment and filler, solvent, etc.It features great properties as：

Excellent mechanical strength	Sealing performance	Moisture resistance
Excellent salt spray resistance	Excellent weather resistance

Chlorinated Rubber Thick Paste Finish Basic Technical Datasheet

Color	Customized
Gloss	Semi-gloss
Density	~1.38Kg/L(after mixing)
Solid Volume	(60±2 )%
Standard Film thickness	100um dry film thickness  (about 167um wet film thickness)
Theoretical spreading rate	4.34m²/Kg (100um dry film thickness)
Full cure	(23±2℃ ) 7h
Flash Point	38℃

Chlorinated Rubber Thick Paste Finish Product Packaging Packaging: 20 kg in a 20-liter iron bucket. Shelf Life: 12 months If exceeding shelf life, the products shall be tested before using.

Chlorinated Rubber Thick Paste Finish Applicable Environment

Workshop steel frame	Substation	Bridge steel structure	Offshore platform
Container	Municipal guardrail	Storage rack	Communication tower

Chlorinated Rubber Thick Paste Finish Finished Projects

 

Chlorinated Rubber Thick Paste Finish Production Process

Chlorinated Rubber Thick Paste Finish Instructions For Use

Substrate Treatment：

All surface to be coated shall be clean and dry. The surface shall be evaluated and treated according to ISO8504 standard.

For bare steel, it shall be sandblasted to reach Sa2.5(iso8501-1:2007) standard. Depending on the environment of the non-immersed part, grinding with power tools is acceptable but shall at least reach St2(iso8501-1:2007) standard.

For shop primed steel, the shop primer shall be clean, dry and approved.

For surface painted coatings, this product can apply only to clean, dry and good compatible primer.

Instructions for Use:

Mixing：

Use the power mixer to mix the main paint evenly, and then add the hardener and stir until it is well mixed.

Thinner: Exclusive thinner

Airless spray：

Nozzle tip: 0.017~0.023 inches

Spray pressure: 15~18 Mpa

Thinner ratio: 0~15% (by weight of paint)

Brush, Roller : Recommended Must achieve required thickness

Chlorinated Rubber Thick Paste Finish Company Introduction

Chlorinated Rubber Thick Paste Finish Exhibitions