Acrylic Elastomeric Roof Coating — Stop Roof Leaks Before They Start
A high-elasticity, water-based acrylic membrane that bridges cracks, resists 1000 hours of water immersion and reflects tropical heat — one coating system for concrete and cement roofs in Southeast Asia's harshest weather.
Roof Leaks Cost Far More Than the Coating
Every untreated crack eventually becomes an invoice: water damage, downtime, and repeat repairs.
Standing Rainwater
Tropical downpours pond on flat roofs for days. Porous concrete slowly lets water through.
→ 1000 h water immersion, zero changeScorching Heat
Dark roofs reach 70°C+; coatings blister while interiors bake and cooling bills soar.
→ Bright white solar-reflective membraneMoving Cracks
Concrete expands and contracts daily. Rigid coatings crack within months — leaks return.
→ ≥600% elongation follows the movementRepeat Repairs
Patchwork repairs every rainy season drain maintenance budgets year after year.
→ One seamless membrane, whole-roof solutionSix Reasons This Coating Holds Up
Engineered as a single-component, water-based system — easy to apply, hard to beat.
Superior Flexibility
Elongation ≥600% (Type I per GB/T standard) with tensile strength ≥1.0 MPa — the film stretches, recovers, and never brittle-cracks.
Excellent Water Resistance
1000-hour water immersion with no change, and water permeability ≤1.4 mL — a true waterproofing barrier, not just a paint.
☀️ Weather & UV Durability
Artificial weathering test passed with no blistering, peeling or cracking; chalking ≤ level 1 under intense UV.
Acid-Rain & Stain Resistance
Resists acid rain, stains and alkali attack (48 h alkali immersion, no change) — built for industrial and coastal atmospheres.
Breathable Film
Superior air permeability lets moisture vapor escape from the substrate instead of trapping blisters underneath.
Water-Based & Eco-Friendly
Single-component acrylic emulsion, thinned with plain water, non-dangerous goods for transport — safe for occupied factories.
Technical Data
Tested per GB/T standards. Full TDS and test reports available on request.
| Dry film thickness | 1000 µm (suggested single system) |
|---|---|
| Density | 1.2 kg/L |
| Tensile strength | ≥1.0 MPa |
| Elongation | ≥600% (Type I) / ≥200% (Type II) |
| Water resistance | 1000 h — no change |
| Water permeability | ≤1.4 mL |
| Scrub resistance | 2000 cycles — no damage |
| Resistance to stain | ≤20 |
| Alkali resistance (48 h) | No change |
| Chalking level | ≤1 |
| Artificial weathering | No blistering, peeling or cracking |
| Drying time (23°C) | Touch ≤12 h · Handle ≤24 h · Full cure ≤28 h |
| Application | Spraying, brushing, rolling · Thinner: water |
| Application limit | Do not apply below 0°C or above 85% RH |
* Full technical data is subject to the official TDS (Technical Data Sheet). Contact us to receive the complete TDS and third-party test reports.
Where It Works
One system for every concrete and cement-mortar roof — from factories to warehouses across tropical Asia.
Industrial Concrete Roofs
Factory buildings and plant rooms — seamless membrane over large pours and parapets.
Monsoon-Climate Roofs
Southeast Asian rainy seasons — 1000 h water resistance keeps interiors dry all season.
Heat-Exposed Warehouses
White reflective film cuts roof surface temperature and indoor cooling load.
Cement Mortar Roofs
Roller-applied directly over sound cement screed with the exclusive sealing primer.
4-Step Application System
Simple process, professional result — our engineers support you from surface prep to final inspection.
Surface Preparation
Surface must be dry and clean. Remove laitance, grease and oil by mechanical sandblasting; repair constructional weaknesses.
Sealing Primer
Apply the exclusive sealing primer — after priming, the coating can be applied directly, no extra treatment needed.
Main Coating
Apply by spraying, brushing or rolling (nylon/polyester brush, 1/4–1/2" woven roller). Build to 1000 µm suggested film. Mix well before use; thin only with water.
Cure & Inspect
Touch ≤12 h, handle ≤24 h, full cure ≤28 h at 23°C. Avoid solvent-based paints nearby until the film is fully dried.
Packaging & Supply
Factory-direct supply from Changzhou, China — with ready stock in Tangerang, Indonesia.
- Standard Pail 20 kg
- Customized Packaging Available on request
- Shelf Life 24 months (test before use if expired)
- Transport Non-dangerous article — easy logistics
- Color Consistency Batch variation ∆E ≤ 0.2
Why Buyers Choose JIANBANG
Not just a coating supplier — a waterproofing partner with 26 years of factory know-how.
26-Year Source Factory
Jiangsu Bangjie Anticorrosion & Thermal Insulation Technology Co., Ltd. — national high-tech enterprise.
Countries Served
Exported to 87 countries across 7 continents; trusted by port, plant and infrastructure projects worldwide.
Indonesia Local Factory
PT. JIANBANG Paint Indonesia keeps stock in Tangerang — fast delivery and on-site support for Southeast Asia.
Patents & Standards
8 invention patents, 25 utility models, and drafter of national anticorrosion coating standards.
Benchmark Projects
Ports, power plants, petrochemical complexes — real references you can verify.
Free Engineering Support
Free samples, substrate evaluation and system proposals — answers within 24 hours.
Frequently Asked Questions
The questions every roof-projects buyer asks first.
What substrates can it be applied to?
Concrete and cement mortar roof substrates. If the substrate is pre-coated with our exclusive sealing primer, the coating can be applied directly. The surface must be dry and clean — remove laitance, grease or oil by mechanical sandblasting and repair any weaknesses first.
How elastic is it, really?
Elongation is ≥600% (Type I grade per GB/T standard) with tensile strength ≥1.0 MPa. The film stretches with daily thermal movement and bridges hairline cracks instead of splitting — that's what keeps the waterproofing intact year after year.
Can I get a free sample before ordering?
Yes — free samples are available for testing. Message us on WhatsApp or email inquiry@jsbj88.com with your project details and we'll arrange it.
Do you have local stock in Southeast Asia?
Yes. PT. JIANBANG Paint Indonesia (Tangerang, West Java) keeps regular stock, so Indonesian and Southeast Asian projects get fast delivery, local currency settlement and on-site technical support.
What's the packaging and shelf life?
Standard 20 kg pails, customized packaging available. Shelf life is 24 months in cool, dry, ventilated storage away from fire and heat. The product transports as a non-dangerous article.
Get a Free Sample & Coating Proposal
Tell us your roof substrate, area and city — our engineers will reply within 24 hours with a system recommendation and quotation.
WhatsApp: +86 XXX-XXXX-XXXX Email: inquiry@jsbj88.com

