BS54- 10 Acrylic Polyurethane Coating

This two-component product is mainly prepared by aliphatic acrylic polyurethane resin, and anti-rust pigments. This product features:

Good gloss and color retention	Strong  adhesion	Fast drying
Long durability	Great resistance to salt	Resistant to chemical corrosion, rust and impact.

BS54-10 Acrylic Polyurethane Coating Video

BS54-10 Acrylic Polyurethane Coating

Basic Technical Datasheet

Color	Custom color
Density, kg/L	~1.37
Flash point,℃	27
Solid  content	≥60%
Impact resistance, cm	50
Adhesion, MPa	≥6
Viscosity, s	≥90
Fineness, µm	≤30
Gross %	≥85
Flexibility,mm	≤2
Hardness	≥HB
Pot life, h	8
Theoretical spreading rate, kg/m2 @ 70~80 µm dry film	0.23~0.25
VOC, g/L	420

BS54-10 Acrylic Polyurethane Coating Product Packaging Packaging: Part A: 20 kg in a 20-liter iron barrel Part B: 4kg in a 5-liter iron barrel. Shelf Life: Part A: 12 months    Part B: 12 months If exceeding shelf life,  the products shall be tested before using.

BS54-10 Acrylic Polyurethane Coating

Applicable Environment

Traffic sign	Power plant	Bridges	petrochemical factory
Ships	Paper mills	Steel structure	machinery equipment

BS54-10 Acrylic Polyurethane Coating

Compatibility

	Product	Thickness
Primer:	H06- 1 Epoxy Zinc Rich Primer	2*40 µm
Midcoat:	H53-6 Epoxy Mica Iron Oxide Paint	150 µm
Topcoat:	BS52-10 Acrylic Polyurethane Finish Paint	2*40 µm

BS54-10 Acrylic Polyurethane Coating

Finished Projects

BS54-10 Acrylic Polyurethane Coating

Production Process

BS54-10 Acrylic Polyurethane Coating 

Instructions For Use

Substrate Treatment：

All surface shall be clean, dry and free from any contaminations to achieve long lasting function.

      Primed surfaces

The primer surface should be dry and free from all contaminations.

Areas  of  breakdown,  damage  etc.,  should  be  prepared  to  the  specified standard, e.g. Sa2.5.

Instructions for Use:

Mixing

Mix part A and part B as 20:4 by weight. Slowly add part B into part A and ensure mixed completely.

Thinner

BS52-10 exclusive thinner ≤ 10 % w./w.

Cleaner

BS52-10 exclusive thinner

Application methods:

Airless spray (recommended): Nozzle tip: 0.017-0.023 inch, minimum 150 bar/2100 psi.

Brush: recommended for small areas only.

Roller: recommended for small areas only.

BS54-10 Acrylic Polyurethane Coating

Company Introduction

BS54-10 Acrylic Polyurethane Coating

Exhibitions