You are here: Home » Products » Silicone Coating » Insulating Paint » Anti-Corrosive Paint | Durable Protection For Metal Surfaces

Two Component Anti-Corrosive Paint | Durable Protection For Metal Surfaces

Anti-Corrosive Paint | Durable Protection For Metal Surfaces

Brand:
YMS COATINGS
Color:
Gray
Gloss:
Glossy
Density:
~1.25Kg/L(after mixing)
Flash Point:
27℃
Volume solid:
(48±2 )%
Mixing:
Use the power mixer to mix the main paint evenly, and then as you stir it, you add the hardener until you get to mix well.
Mixing Ratio:
Part A: Part B= 30:3 (by weight)
Theoretical spreading rate, kg/m2 :
5.5m²/Kg (80um dry film thickness)


Availability:



Inquiry

Product Description

Two Component Anti-corrosive Paint

Two Component Anti-corrosive Paint is a long lasting anti-corrosive product composed of modified synthetic resin, film-forming assistant, composite zinc powder, and other materials through scientific and reasonable adjustment of formula.It has the following resistance characteristics:

Weather-resistant	Wear-resistant	High temperature resistance
Oil resistance	Good thermal conductivity	Strong adhesion

Two Component Anti-corrosive Paint Video

Two Component Anti-corrosive Paint

Basic Technical Datasheet

Color

Gray

Gloss

Glossy

Density

~1.25Kg/L (after mixing)

Solid Volume

(48±2 )%

Standard Film thickness

80um dry film thickness (about 165um wet film thickness)

Theoretical spreading rate

5.5m²/Kg (80um dry film thickness)

Full Cure

(23±2℃)24h

Flash Point

27℃

Two Component Anti-corrosive Paint Product Packaging

Packaging:

part A:30kg in a 20-liter iron bucket.

part B:3kg in a 4-liter iron bucket.

Shelf Life:

12 months If exceeding shelf life, the products shall be tested before using.

Two Component Anti-corrosive Paint

Applicable Environment


Sluice gate	Bridge	substation	power plant

steel structure	marine engineering	water transmission pipeline	chimney

Two Component Anti-corrosive Paint Compatibility

Product

Thickness

Paint:

Anti-corrosive Paint

2*40 um (dry film thickness)

Finish:

Acrylic Polyurethane Finish

2*40 um (dry film thickness)

Two Component Anti-corrosive Paint

Finished Projects

Two Component Anti-corrosive Paint

Production Process

Two Component Anti-corrosive Paint

Instructions For Use

Substrate Treatment：

All surface to be coated shall be clean and dry. The surface shall be evaluated and treated according to ISO8504 standard.

For bare steel, it shall be sandblasted to reach Sa2.5(iso8501-1:2007) standard. Depending on the environment of the non-immersed part, grinding with power tools is acceptable but shall at least reach St2(iso8501-1:2007) standard.

For shop primed steel, the shop primer shall be clean, dry and approved.

For surface painted coatings, this product can apply only to clean, dry and good compatible primer.

Instructions for Use: