H20-2 Polyurethane Waterproof Paint

This product is a two-component waterproof coating composed of isocyanate and hydroxyl resin, and it has the following characteristics:

excellent water resistance	weather resistance	light retention
long-term recoating	Easy to construct	strongly adhered

H20-2 Polyurethane Waterproof Paint Video

H20-2 Polyurethane Waterproof Paint 

Basic Technical Datasheet

Color	Customized
Gloss	High gloss
Density	~1.3Kg/L
Hardness	Polyurethane curing agent
Solid Volume	(50±2 )%
Standard Film thickness	60µm dry film thickness  (about 120µm wet film thickness)
Theoretical spreading rate	6.41m²/Kg (60µm dry film thickness)
Full cure	7d
Flash Point	33℃

H20-2 Polyurethane Waterproof Paint Product Packaging Packaging: Part A: 20 kg in a 20-liter iron barrel Part B: 4 kg in a 5-liter iron barrel. Shelf Life: Part A: 12 months    Part B: 12 months If exceeding shelf life,  the products shall be tested before using.

H20-2 Polyurethane Waterproof Paint

Applicable Environment

Basement	Bathroom	Swimming pool	Cookroom

H20-2 Polyurethane Waterproof Paint

Compatibility

	Product	dry film Thickness
Primer:	Sealing Primer	1*20 µm
Topcoat:	Polyurethane Waterproof Paint	2*30 mm

H20-2 Polyurethane Waterproof Paint

Finished Projects

H20-2 Polyurethane Waterproof Paint

Production Process

H20-2 Polyurethane Waterproof Paint

Instructions For Use

Substrate Treatment：

All surfaces to be coated shall be clean and dry. The surface shall be evaluated and treated according to ISO8504 standard.

Steel: Sanding to Sa2.5 (ISO8501-1:2007). It is acceptable to polish by power tools to meet at least St2.0 (ISO8501-1:2007).

Concrete substrate coating surface treatment:

a. Concrete grass-roots floor, first of all, must confirm whether the base surface concrete below whether there is a reliable moisture-proof facilities. New concrete or cement base at least 28 days of maintenance time, and its water content should not exceed 5%, using empirical methods to assess the water content of the base.  

b. The grass-roots floor surface should be clean, solid and free of contaminants, such as mortar and paint sputtering, maintenance agents, grease, etc. For too much floating pulp, it is best to use light roughing, grinding. Oily ground, using electric angle grinder grinding.

c. The surface of the ground cracks, empty drums and other defects should be repaired and flat.  

d. No matter what method is used to treat the surface, it must eventually be clean, solid and dry on the grass-roots surface. It is particularly important that the grass-roots level must not be in a state of rising moisture.

e. Grassroots clean-up, polished with a polishing machine.

H20-2 Polyurethane Waterproof Paint

Company Introduction

H20-2 Polyurethane Waterproof Paint

Exhibitions