Chlorinated Rubber Finish

This product is based on chlorinated rubber It has the following resistance characteristics:

Weather resistance	Water resistance	Rapid drying
Excellent adhesion	Applicable at low temperatures	Corrosion resistance

Chlorinated Rubber Finish Video

Chlorinated Rubber Finish Basic Technical Datasheet

Color	Customized
Gloss	Semi-gloss
Density	~1.41Kg/L
Solid Volume	(45±2 )%
Standard Film thickness	60um dry film thickness  (about 125um wet film thickness)
Theoretical spreading rate	5.32m²/Kg (60um dry film thickness)
Flash Point	31℃

Chlorinated Rubber Finish Product Packaging Packaging: 22kg in a 20-liter iron bucket. Shelf Life: 12 months If exceeding shelf life, the products shall be tested before using.

Chlorinated Rubber Finish Applicable Environment

Bridge	Tunnel	Sluice	Crane
Offshore facilities	Oil pipeline	Ship	Water pipeline

Chlorinated Rubber Finish Compatibility

	Product	Thickness
Primer:	Chlorinated Rubber Anti-rust Paint	2*30 µm (dry film thickness)
Paint:	Chlorinated Rubber Mica Iron Oxide Intermediate Paint	2*40 µm (dry film thickness)
Topcoat:	Chlorinated Rubber Finish	2*30 µm (dry film thickness)

Chlorinated Rubber Finish Finished Projects

 

Chlorinated Rubber Finish Production Process

Chlorinated Rubber Finish Instructions For Use

Substrate Treatment：

Instructions for Use:

• Mixing:

Ready to use

• Thinner:

Chlorinated rubber thinner

• Airless spray：

Nozzle tip: 0.017~0.023 inches

Spray pressure: 18~25Mpa

Thinner ratio: 0~10% (by weight of paint)

• Brush、Roller：

Recommended

Must achieve required thickness

Chlorinated Rubber Finish Company Introduction

Chlorinated Rubber Finish Exhibitions