Epoxy Red Lead Anti-rust Primer

This two-component product is composed of epoxy resin, red lead, anti-rust pigment, amine curing agent, auxiliaries, etc.It has the following resistance characteristics:

Excellent adhesion

Mechanical strength

Rust resistance

Epoxy Red Lead Anti-rust Primer Basic Technical Datasheet

Color	Orange
Gloss	Matte, Flat
Density	~1.4Kg/L (after mixing)
Solid Volume	(45±2 )%
Standard Film thickness	80um dry film thickness  (about 178um wet film thickness)
Theoretical spreading rate	4m²/Kg (80um dry film thickness)
Flash Point	38℃

Epoxy Red Lead Anti-rust Primer Product Packaging Packaging: Part A 25KG are packaged in a 20L iron drum. Part B 3KG are packaged in a 3.7L iron drum. Shelf Life: 12 months If exceeding shelf life, the products shall be tested before using.

Epoxy Red Lead Anti-rust Primer Applicable Environment

Pipeline	Sedimentation tank	Bridge	Workshop beams and columns
Storage tank	Ship hull bottom	Reaction kettle	Offshore wind turbine tower

Epoxy Red Lead Anti-rust Primer Compatibility

	Product	Thickness
Primer：	Epoxy Red Lead Anti-rust Primer	2*40 µm (dry film thickness)
Topcoat:	Epoxy Mica Iron Oxide Intermediate Paint	2*35 µm (dry film thickness)
Topcoat:	Epoxy Finish Paint	2*40 µm (dry film thickness)

Epoxy Red Lead Anti-rust Primer Finished Projects

 

Epoxy Red Lead Anti-rust Primer Production Process

Epoxy Red Lead Anti-rust Primer Instructions For Use

Substrate Treatment：

Instructions for Use:

• Mixing:

Use the power mixer to mix the main paint evenly, and then as you stir it, you add the hardener until you get to mix well.

• Thinner:

Exclusive epoxy paint thinner

Airless spray：

Nozzle tip: 0.017~0.023inches

Spray pressure: 15~18Mpa

Thinner ratio: 5~15% (by weight of paint)

• Brush, Roller：

Recommended Must achieve required thickness

Epoxy Red Lead Anti-rust Primer Company Introduction

Epoxy Red Lead Anti-rust Primer Exhibitions