Industrial Functional Epoxy Floor Paint

This two component paint is mainly prepared by epoxy resin, curing agent, dispersant and aggregates depend on requirements.It has the following resistance characteristics:

Slip resistance	Anti-static	Acid and alkali resistance
Solvent resistance	Excellent hardness	Excellent adhesion

Industrial Functional Epoxy Floor Paint Video

Industrial Functional Epoxy Floor Paint Basic Technical Datasheet

Color	Custom
Gloss	Glossy
Density	~1.4Kg/L(after mixing)
Hardness	Epoxy paint curing agent
Solid Volume	(98±2 )%
Standard Film thickness	1mm dry film thickness  (about 1.02mm wet film thickness)
Theoretical spreading rate	0.74m²/Kg (1mm dry film thickness)
Full Cure	(23±2℃ )7d
Flash Point	27℃

Industrial Functional Epoxy Floor Paint Product Packaging Packaging: Part A 20kg in a 20-liter iron bucket. Part B 5kg in a 6-liter iron bucket. Shelf Life: 12 months If exceeding shelf life, the products shall be tested before using.

Industrial Functional Epoxy Floor Paint Applicable Environment

Warehouse	Sorting Center	Machinery Manufacturing Workshop	Auto Parts Workshop
Food Processing Workshop	Hardware Processing Workshop	Printing Workshop	Chemical Workshop

Industrial Functional Epoxy Floor Paint Compatibility

	Product	Thickness
Primer:	Epoxy Sealing Primer	0.1mm (Thickness)
Paint：	Epoxy Putty	1mm  (Thickness)
Topcoat:	Industrial Functional Epoxy Floor Paint	0.2mm (Thickness)

Industrial Functional Epoxy Floor Paint Finished Projects

 

Industrial Functional Epoxy Floor Paint Production Process

Industrial Functional Epoxy Floor Paint Instructions For Use

Substrate Treatment：

a. Concrete grass-roots floor, first of all, must confirm whether the base surface concrete below whether there is a reliable moisture-proof facilities. New concrete or cement base at least 28 days of maintenance time, and its water content should not exceed 5%, using empirical methods to assess the water content of the base.  

b. The grass-roots floor surface should be clean, solid and free of contaminants, such as mortar and paint sputtering, maintenance agents, grease, etc. For too much floating pulp, it is best to use light roughing, grinding. Oily ground, using electric angle grinder grinding.

c. The surface of the ground cracks, empty drums and other defects should be repaired and flat.  

d. No matter what method is used to treat the surface, it must eventually be clean, solid and dry on the grass-roots surface. It is particularly important that the grass-roots level must not be in a state of rising moisture.

e. Grassroots clean-up, polished with a polishing machine.

Instructions for Use:

• Mixing:

Use the power mixer to mix the main paint evenly, and then as you stir it, you add the hardener until you get to mix well. Generally, if the temperature is below 10 ℃, it needs 20 min induction time; if the temperature is over 10℃, it needs 15 min induction time.

• Mixing Ratio：

Part A: Part B= 20:5 (by weight)

• Thinner

Epoxy paint thinner

• Airless spray

Nozzle tip: 0.017~0.025 inches

Spray pressure: 15~18Mpa

Thinner ratio: 0~15% (by weight of paint)

• Brush

Recommended

Must achieve required thickness

Industrial Functional Epoxy Floor Paint Company Introduction

Industrial Functional Epoxy Floor Paint Exhibitions