You are here: Home » Products » Waterproof Paint » Waterproof Paint for Metal » Olystyrene Anti-corrosive Paint | High-Performance Protective Coating

Olystyrene Anti-corrosive Paint | High-Performance Protective Coating

Color:
Customized
Gloss:
High gloss
Density:
~1.2Kg/L
Flash Point:
26℃
Volume solid:
(45±2 )%
Theoretical spreading rate, kg/m2 :
4.68m²/Kg (60um dry film thickness)


Availability:



Inquiry

Product Description

Polystyrene Anti-corrosive Paint

This product is made from polystyrene, modified random polypropylene, modified resin, chlorinated rubber plasticizer, anti-corrosive pigment and filler, etc.It has the following resistance characteristics:

strong adhesiveness	toughness	wear-resistant
oil-resistant	mildew-resistant	high glossiness

Polystyrene Anti-corrosive Paint Video

Polystyrene Anti-corrosive Paint

Basic Technical Datasheet

Color

Gray, Iron red

Gloss

Flat

Density

~1.42Kg/L (after mixing)

Hardness

Epoxy zinc phosphate curing agent

Solid Volume

(50±2 )%

Standard Film thickness

100µm dry film thickness (about 200µm wet film thickness)

Theoretical spreading rate

3.52m²/Kg (100µm dry film thickness)

Full Cure

(23±2℃) 7d

Flash Point

25℃

Polystyrene Anti-corrosive Paint Product Packaging

Packaging:

22kg in a 20-liter iron bucket.

Shelf Life:

12 months If exceeding shelf life, the products shall be tested before using.

Polystyrene Anti-corrosive Paint

Applicable Environment

electrical equipment

storage tank

pipeline

cement silo

Polystyrene Anti-corrosive Paint Compatibility

	Product	Thickness
Primer:	Epoxy Anti-rust Primer	2*40 um (dry film thickness)
Paint:	Epoxy Intermediate Paint	1*60 um (dry film thickness)
Finish:	Polystyrene Anti-corrosive Paint	2*40 um (dry film thickness)

Polystyrene Anti-corrosive Paint

Finished Projects

Polystyrene Anti-corrosive Paint

Production Process

Polystyrene Anti-corrosive Paint

Instructions For Use

Substrate Treatment：

All surface to be coated shall be clean and dry. The surface shall be evaluated and treated according to ISO8504 standard.

For bare steel, it shall be sandblasted to reach Sa2.5(iso8501-1:2007) standard. Depending on the environment of the non-immersed part, grinding with power tools is acceptable but shall at least reach St2(iso8501-1:2007) standard.

For shop primed steel, the shop primer shall be clean, dry and approved.

For surface painted coatings, this product can apply only to clean, dry and good compatible primer.

Instructions for Use: