Polyurethane Gloss Varnish Polyurethane Anti-corrosive Varnish

This product is a single-component moisture curing varnish made from polyisocyanate, auxiliaries, catalysts, solvent, etc.It has the following resistance characteristics:

Water Resistance	Oil Resistance	Abrasion Resistance
High Anti-corrosion Performance	Chemical Medium Resistance	Bright Paint Film

Polyurethane Gloss Varnish Polyurethane Anti-corrosive Varnish Video

Polyurethane Gloss Varnish Polyurethane Anti-corrosive Varnish Basic Technical Datasheet

Color	Transparent
Gloss	Glossy
Density	~1Kg/L
Solid Volume	(40±2 )%
Standard Film thickness	30um dry film thickness  (about 75um wet film thickness)
Theoretical spreading rate	14.3m²/Kg (30um dry film thickness)
Full Cure	(23±2℃ )24h
Flash Point	27℃

Polyurethane Gloss Varnish Polyurethane Anti-corrosive Varnish Product Packaging Packaging: 20kg in a 20-liter iron bucket. Shelf Life: 12 months If exceeding shelf life, the products shall be tested before using.

Polyurethane Gloss Varnish Polyurethane Anti-corrosive Varnish Applicable Environment

Ship Deck	Guardrail	Bridge	Solid Wood Furniture
Automotive Interior	Transmission Pipeline	Factory Building Steel Structure	Mechanical Equipment Housing

Polyurethane Gloss Varnish Polyurethane Anti-corrosive Varnish Compatibility

	Product	Thickness
Topcoat:	Polyurethane Gloss Varnish	30 µm (dry film thickness)

Polyurethane Gloss Varnish Polyurethane Anti-corrosive Varnish Finished Projects

 

Polyurethane Gloss Varnish Polyurethane Anti-corrosive Varnish Production Process

Polyurethane Gloss Varnish Polyurethane Anti-corrosive Varnish Instructions For Use

Substrate Treatment：

All surface to be coated shall be clean and dry. The surface shall be evaluated and treated according to ISO8504 standard.

For bare steel, it shall be sandblasted to reach Sa2.5(iso8501-1:2007) standard. Depending on the environment of the non-immersed part, grinding with power tools is acceptable but shall at least reach St2(iso8501-1:2007) standard.

For shop primed steel, the shop primer shall be clean, dry and approved.

For surface painted coatings, this product can apply only to clean, dry and good compatible primer.

Instructions for Use:

• Mixing:

Ready to use

• Thinner：

Polyurethane thinner

• Airless spray：

Nozzle tip: 0.017~0.023 inches

Spray pressure: 15~18Mpa

Thinner ratio: 0~15% (by weight of paint)

• Brush、Roller

Recommended

Must achieve required thickness

Polyurethane Gloss Varnish Polyurethane Anti-corrosive Varnish Company Introduction

Polyurethane Gloss Varnish Polyurethane Anti-corrosive Varnish Exhibitions