Rubber Asphalt Waterproof Coating

This product is composed of modified asphalt, organosilicon components and functional additives.It features great properties as：

Superior Substrate Adhesion	Good Crack‑bridging Property	Good Anti‑corrosion Performance
Single‑component, Cold‑applied System	Reliable Waterproof & Sealing Performance

Rubber Asphalt Waterproof Coating Basic Technical Datasheet

Color	Black
Gloss	Matte
Density	~1.25 Kg/L
Solid Volume	(55±2) %
Standard Film thickness	120μm dry film thickness (about 218μm wet film thickness)
Theoretical spreading rate	3.65 m²/Kg (120μm dry film thickness)
Full cure	(23±2℃) 24h
Flash Point	＞93℃

Rubber Asphalt Waterproof Coating Product Packaging Packaging: 17.5 kg in a 20‑liter plastic bucket. Shelf Life: 12 months If exceeding shelf life, the products shall be tested before using.

Rubber Asphalt Waterproof Coating Applicable Environment

Concrete roof	Tunnel concrete structures	Basements	Bridge expansion joints

Rubber Asphalt Waterproof Coating Finished Projects

 

Rubber Asphalt Waterproof Coating Production Process

Rubber Asphalt Waterproof Coating Instructions For Use

Substrate Treatment：

Concrete surface shall be sound, clean and dry, free of laitance, dust, oil and contaminants. Repair cracks and defective areas in advance. Surface preparation shall comply with relevant concrete protection standards.

Instructions for Use:

Mixing：

This product is single‑component. No mixing of multiple components required. Stir evenly before application.

Thinner: Not recommended, do not dilute.

Airless spray：

Preferred for large‑area construction 

Nozzle tip: 0.025~0.031 inches 

Spray pressure: 12‑18 Mpa

Brush, Roller : Acceptable for local detail and small‑area application. Meet specified application dosage.

Rubber Asphalt Waterproof Coating Company Introduction

Rubber Asphalt Waterproof Coating Exhibitions