B21-2
YMS
Black
Glossy
~1.1Kg/L
31℃
100 %
Use the power mixer to mix the main paint evenly, and then as you stir it, you add the hardener until you get to mix well.
Part A: Part B= 3:1 (by weight)
0.9m²/Kg
Availability: | |
---|---|
Steel Pipe Pile Special Anti corrosive Paint
Steel pipe pile special anti corrosive coating is the third generation of elastic wear-resistant body newly developed by JIANBANG PAINT. It is composed of semi-prepolymer, modified amino polyether, amine chain extender and other raw materials by on-site spraying.It has the following resistance characteristics:
|
|
|
|
|
|
Steel Pipe Pile Special Anti corrosive Paint Video
Steel Pipe Pile Special Anti corrosive Paint Basic Technical Datasheet
Color | Black |
Gloss | Glossy |
Density | ~1.1 Kg/L |
Solid Volume | 100% |
Standard Film thickness | 1mm dry film thickness (about 1mm wet film thickness) |
Theoretical spreading rate | 0.9m²/Kg (40um dry film thickness) |
Flash Point | 31℃ |
![]() | Steel Pipe Pile Special Anti corrosive Paint Product PackagingPackaging: Part A:210kg in a 200-liter iron bucket. Part B:70kg in a 50-liter iron bucket. Shelf Life: 6 months If exceeding shelf life, the products shall be tested before using. |
![]() | ![]() | ![]() | |
Gas pipeline | Petrochemical pipeline | Municipal water pipe | Oil pipeline |
![]() | ![]() | ![]() |
![]() | ![]() | ![]() |
Substrate Treatment:
Metal substrate must remove rust, grease, ensure the surface is clean.
Power tool grinding, but at least reach St2 (iso8501-1:2007)
Instructions for Use:
Mixing:
Use the power mixer to mix the main paint evenly, and then as you stir it, you add the hardener until you get to mix well.
Mixing Ratio
Part A: Part B= 3:1 (by weight)
Thinner:
Exclusive thinner
Airless spray:
Nozzle tip: 0.017~0.023 inches
Spray pressure: 15~18Mpa
BrushRoller:
Recommended
Must achieve required thickness
![]() | |||
![]() | ![]() | ![]() | ![]() |
![]() | ![]() | ![]() |
![]() | ![]() | ![]() |
Steel Pipe Pile Special Anti corrosive Paint
Steel pipe pile special anti corrosive coating is the third generation of elastic wear-resistant body newly developed by JIANBANG PAINT. It is composed of semi-prepolymer, modified amino polyether, amine chain extender and other raw materials by on-site spraying.It has the following resistance characteristics:
|
|
|
|
|
|
Steel Pipe Pile Special Anti corrosive Paint Video
Steel Pipe Pile Special Anti corrosive Paint Basic Technical Datasheet
Color | Black |
Gloss | Glossy |
Density | ~1.1 Kg/L |
Solid Volume | 100% |
Standard Film thickness | 1mm dry film thickness (about 1mm wet film thickness) |
Theoretical spreading rate | 0.9m²/Kg (40um dry film thickness) |
Flash Point | 31℃ |
![]() | Steel Pipe Pile Special Anti corrosive Paint Product PackagingPackaging: Part A:210kg in a 200-liter iron bucket. Part B:70kg in a 50-liter iron bucket. Shelf Life: 6 months If exceeding shelf life, the products shall be tested before using. |
![]() | ![]() | ![]() | |
Gas pipeline | Petrochemical pipeline | Municipal water pipe | Oil pipeline |
![]() | ![]() | ![]() |
![]() | ![]() | ![]() |
Substrate Treatment:
Metal substrate must remove rust, grease, ensure the surface is clean.
Power tool grinding, but at least reach St2 (iso8501-1:2007)
Instructions for Use:
Mixing:
Use the power mixer to mix the main paint evenly, and then as you stir it, you add the hardener until you get to mix well.
Mixing Ratio
Part A: Part B= 3:1 (by weight)
Thinner:
Exclusive thinner
Airless spray:
Nozzle tip: 0.017~0.023 inches
Spray pressure: 15~18Mpa
BrushRoller:
Recommended
Must achieve required thickness
![]() | |||
![]() | ![]() | ![]() | ![]() |
![]() | ![]() | ![]() |
![]() | ![]() | ![]() |