EG-21
YMS
Iron red
Flat
~1.35Kg/L
(43±2 )%
Level 1
3.18m²/Kg (100um dry film thickness)
Availability: | |
---|---|
Waterborne Alkyd Anti-rust Paint
This one component product is mainly composed of waterborne alkyd resin by adding titanium dioxide, waterborne auxiliaries, water etc.and it has the following outstanding characteristics:
|
|
|
Color | Iron red |
Gloss | Flat |
Density | ~1.35Kg/L(after mixing) |
Solid Volume | (43±2 )% |
Standard Film thickness | 100um dry film thickness (about 233um wet film thickness) |
Theoretical spreading rate | 3.18m²/Kg (100um dry film thickness) |
Adhesion | Level 1 |
![]() | Waterborne Alkyd Anti-rust Paint Product PackagingPackaging: 25kg in a 20-liter iron bucket. Shelf Life: 12 months If exceeding shelf life, the products shall be tested before using. |
![]() | ![]() | ![]() | ![]() |
Guardrail | Mechanical equipment | Workshop steel beam | Factory reactor |
Product | Thickness | |
Primer: | Waterborne Alkyd Anti-rust Paint | 2*50 µm (dry film thickness) |
Topcoat: | Waterborne Alkyd Finish | 2*50um (dry film thickness) |
![]() | ![]() | ![]() |
![]() | ![]() | ![]() |
Substrate Treatment:
The surface to be coated shall be clean, dry and free from contaminations. Also, the surface shall be evaluated and handled according to ISO8504 standard.
Painted surface: only apply to clean, dry and intact compatible primer.
Mixing:
Ready to use
Thinner:
Clean water
Thinner ratio:
5~15% (by weight of paint); or make appropriate adjustment according to specific condition up to 25%
Airless spray:
Nozzle tip: 0.017~0.023 inches
Spray pressure: 15~18Mpa
Thinner ratio: 5~15% (by weight of paint)
Spray viscosity:
50-60 secs
Brush viscosity:
60-70 secs. (viscosity cup 4, 23±2℃)
Brush、Roller:
Use soft wool brush or roller
Recommended
Must achieve required thickness
![]() | |||
![]() | ![]() | ![]() | ![]() |
![]() | ![]() | ![]() |
![]() | ![]() | ![]() |
Waterborne Alkyd Anti-rust Paint
This one component product is mainly composed of waterborne alkyd resin by adding titanium dioxide, waterborne auxiliaries, water etc.and it has the following outstanding characteristics:
|
|
|
Color | Iron red |
Gloss | Flat |
Density | ~1.35Kg/L(after mixing) |
Solid Volume | (43±2 )% |
Standard Film thickness | 100um dry film thickness (about 233um wet film thickness) |
Theoretical spreading rate | 3.18m²/Kg (100um dry film thickness) |
Adhesion | Level 1 |
![]() | Waterborne Alkyd Anti-rust Paint Product PackagingPackaging: 25kg in a 20-liter iron bucket. Shelf Life: 12 months If exceeding shelf life, the products shall be tested before using. |
![]() | ![]() | ![]() | ![]() |
Guardrail | Mechanical equipment | Workshop steel beam | Factory reactor |
Product | Thickness | |
Primer: | Waterborne Alkyd Anti-rust Paint | 2*50 µm (dry film thickness) |
Topcoat: | Waterborne Alkyd Finish | 2*50um (dry film thickness) |
![]() | ![]() | ![]() |
![]() | ![]() | ![]() |
Substrate Treatment:
The surface to be coated shall be clean, dry and free from contaminations. Also, the surface shall be evaluated and handled according to ISO8504 standard.
Painted surface: only apply to clean, dry and intact compatible primer.
Mixing:
Ready to use
Thinner:
Clean water
Thinner ratio:
5~15% (by weight of paint); or make appropriate adjustment according to specific condition up to 25%
Airless spray:
Nozzle tip: 0.017~0.023 inches
Spray pressure: 15~18Mpa
Thinner ratio: 5~15% (by weight of paint)
Spray viscosity:
50-60 secs
Brush viscosity:
60-70 secs. (viscosity cup 4, 23±2℃)
Brush、Roller:
Use soft wool brush or roller
Recommended
Must achieve required thickness
![]() | |||
![]() | ![]() | ![]() | ![]() |
![]() | ![]() | ![]() |
![]() | ![]() | ![]() |