Acrylic Polyurethane Finish

Acrylic polyurethane finish is a two-component high gloss finish based on aliphatic isocyanates and hydroxyl resins.It has the following characteristics：

Superior weather resistance	Strong gloss retention	Excellent adhesion
Good anti‑corrosion property	Strong rust‑preventing performance	Can be over‑coated multiple times

Acrylic Polyurethane Finish Video

Acrylic Polyurethane Finish Basic Technical Datasheet

Color	Customized
Gloss	High gloss
Density	~1.3Kg/L
Hardness	Polyurethane curing agent
Solid Volume	(50±2 )%
Standard Film thickness	60um dry film thickness  (about 120um wet film thickness)
Theoretical spreading rate	6.4m²/Kg (60um dry film thickness)
Full cure	7d
Flash Point	33℃

Acrylic Polyurethane Finish Product Packaging Packaging: part A：20 kg in a 20-liter iron bucket. part B：4 kg in a 5-liter iron bucket. Shelf Life: 12 months If exceeding shelf life, the products shall be tested before using.

Acrylic Polyurethane Finish Applicable Environment

Bridges	Workshop Steel Components	Port Machinery	Offshore Platform Superstructures
Chemical Plants	Power Plants	Wind Power Towers	Storage Tanks

Acrylic Polyurethane Finish Compatibility

	Product	Thickness
Primer:	Epoxy Zinc Rich Primer	2*50um  (dry film thickness)
Midcoat:	Epoxy Mica Iron Oxide Intermediate Paint	2*50 µm (dry film thickness)
Topcoat:	Acrylic Polyurethane Finish	2*30um (dry film thickness)

Acrylic Polyurethane Finish Finished Projects

Acrylic Polyurethane Finish Production Process

Acrylic Polyurethane Finish Instructions For Use

Substrate Treatment：

All surface to be coated shall be clean and dry. The surface shall be evaluated and treated according to ISO8504 standard.

Surface painted coatings:  apply only to clean, dry and good compatible primer.

Instructions for Use:

• Mixing:

Use the power mixer to mix the main paint evenly, and then add the hardener and stir until it is well mixed.

• Mixing ratio：

Part A: Part B= 20:4 (by weight)

• Thinner:

Acrylic polyurethane thinner

• Airless spray:

Nozzle tip: 0.017~0.023 inches

Spray pressure: 15~18Mpa

Thinner ratio: 0~15% (by weight of paint)

• Brush、Roller：

Recommended Must achieve required thickness

Acrylic Polyurethane Finish Company Introduction

Acrylic Polyurethane Finish Exhibitions