Acid-Proof Paint | Chemical-Resistant Coating Solutions for Industry

This product is composed of hydroxyl epoxy resin, corrosion resistant filler and special resin. Meanwhile, it also has the auxiliary agent, bath agent and isocyanate.It has the following resistance characteristics:

Excellent acid resistance	Alkali resistance	Salt spray resistance
Chemical resistance	High adhesion	bright plump

Acid-proof Paint Basic Technical Datasheet

Color	Customized
Gloss	No gloss, flat, glossy
Density	~1.2Kg/L (after mixing)
Hardness	Acid-proof paint curing agent
Solid Volume	(50±2 )%
Standard Film thickness	120µm dry film thickness  (about 240µm wet film thickness）
Theoretical spreading rate	3.47m²/Kg (60µm dry film thickness)
Full cure	(23±2oC) 24h
Flash Point	27℃

Acid-proof Paint Product Packaging Packaging: part A:20kg in a 20-liter iron bucket. part B:5kg in a 6-liter iron bucket. Shelf Life: 12 months If exceeding shelf life, the products shall be tested before using.

Acid-proof Paint Applicable Environment

Sedimentation tank	Electroplating plant	Reactor	Chemical laboratory
Pickling tank	Tunnel	Desulfurization tower	Acid liquid pipeline

Acid-proof Paint Compatibility

	Product	Thickness
Primer:	Acid-proof Primer	2*60 µm (dry film thickness)
Paint:	Acid-proof Finish Paint	2*60 mm (dry film thickness)

Acid-proof Paint Finished Projects

 

Acid-proof Paint Production Process

Acid-proof Paint Instructions For Use

Substrate Treatment：

Instructions for Use:

• Mixing:

Use the power mixer to mix the main paint evenly, and then as you stir it, you add the hardener until you get to mix well.

• Thinner:

Acid-proof paint exclusive thinner

• Airless spray：

Nozzle tip: 0.017~0.023 inches

Spray pressure: 15~18Mpa

Thinner ratio: 0~15% (by weight of paint)

• Brush、Roller：

Recommended Must achieve required thickness

Acid-proof Paint Company Introduction

Acid-proof Paint Exhibitions