You are here: Home » Products » Epoxy Paint » Epoxy Floor Coating » Anti-Static Epoxy Floor Paint | Conductive Floor Coating Solution

Anti-Static Epoxy Floor Paint | Conductive Floor Coating Solution

Brand:
YMS
Color:
Customized
Gloss:
Glossy
Density:
~1.3 Kg/L(after mixing)
Flash Point:
31℃
Volume solid:
(50±2) %
Mixing:
Use the power mixer to mix the main paint evenly, and then as you stir it, you add the hardener until you get to mix well. Generally, if the temperature is below 10 ℃, it needs 20 min induction time; If the temperature is over 10 ℃, it needs 15 min induction time.
Mixing Ratio:
Part A: Part B= 20:5 (by weight)
Theoretical spreading rate, kg/m2 :
3.8m²/Kg (100µm dry film thickness)


Availability:



Inquiry

Product Description

Anti-static Epoxy Floor Paint

This product is a high solid two-component paint which is composed of modified epoxy resin, conductive metal powder, elastic polyamide curing agent, etc.It has the following resistance characteristics:

Long-lasting antistatic performance		Abrasion resistance
Oil resistance	Corrosion resistance

Anti-static Epoxy Floor Paint Video

Anti-static Epoxy Floor Paint Basic Technical Datasheet

Color

Customized

Gloss

Glossy

Density

~1.3Kg/L(after mixing)

Hardness

Epoxy paint curing agent

Solid Volume

(50±2) %

Film thickness

100µm dry film thickness (about 200µm wet film thickness)

Theoretical spreading rate

3.8m²/Kg (100µm dry film thickness)

Full Cure

(23±2℃) 7~15d

Flash Point

31℃

Anti-static Epoxy Floor Paint Product Packaging

Packaging:

part A:20kg in a 20-liter iron bucket.

part B:5kg in a 6-liter iron bucket.

Shelf Life:

12 months If exceeding shelf life, the products shall be tested before using.

Anti-static Epoxy Floor Paint Applicable Environment

Server Room

Electronics Factory

Hazardous Materials Warehouse

Printing Factory

Anti-static Epoxy Floor Paint Compatibility

	Product	Thickness
Primer:	Vinyl Resin Primer	30 µm (dry film thickness)
Paint:	Vinyl Resin Glass Flake Cement	1mm (dry film thickness)
Topcoat:	Vinyl Resin Finish	200 µm (dry film thickness)

Anti-static Epoxy Floor Paint Finished Projects

Anti-static Epoxy Floor Paint Production Process

Anti-static Epoxy Floor Paint Instructions For Use

Substrate Treatment：

a. Concrete grass-roots floor, first of all, must confirm whether the base surface concrete below whether there is a reliable moisture-proof facilities. New concrete or cement base at least 28 days of maintenance time, and its water content should not exceed 5%, using empirical methods to assess the water content of the base.

b. The grass-roots floor surface should be clean, solid and free of contaminants, such as mortar and paint sputtering, maintenance agents, grease, etc. For too much floating pulp, it is best to use light roughing, grinding. Oily ground, using electric angle grinder grinding.

c. The surface of the ground cracks, empty drums and other defects should be repaired and flat.

d. No matter what method is used to treat the surface, it must eventually be clean, solid and dry on the grass-roots surface. It is particularly important that the grass-roots level must not be in a state of rising moisture.

e. Grassroots clean-up, polished with a polishing machine.

Instructions for Use:

Mixing:

Use the power mixer to mix the main paint evenly, and then as you stir it, you add the hardener until you get to mix well. Generally, if the temperature is below 10 ℃, it needs 20 min induction time; If the temperature is over 10 ℃, it needs 15 min induction time.