B12-26 Advanced Outdoor Acrylic Latex Paint

This product is mainly prepared by acrylic copolymer, pigments and auxiliaries. It features:

High adhesion	Easy to apply	Nontoxic & Odorless formula
Fast-drying	Alkali-resistant & waterproof	Scrub-resistant and anti-fouling

B12-26 Advanced Outdoor Acrylic Latex Paint Video

B12-26 Advanced Outdoor Acrylic Latex Paint 

Basic Technical Datasheet

Appearance	Custom color
Density, kg/L	~1.50
Volume  solid	37 %
Resistance to water, 96h	No changes
Resistance to alkali , 48h	No changes
Resistance to scrubs, times	≥2000
Artificial aging test,  600h	No blistering, peeling, cracking, chalking≤ 1,  discoloration≤2
Solubility	Not available
Flammability (solid, gas)	Not available
Theoretical spreading rate, kg/ @ 33µm dry film	0.13
Wet film thickness, µm	96
Dry  film thickness, µm	33
VOC, g/L	0

B12-26 Advanced Outdoor Acrylic Latex Paint Product Packaging Packaging: 25 kg in a 20-liter iron bucket. Shelf Life: 12 months If exceeding shelf life, the products shall be tested before using.

B12-26 Advanced Outdoor Acrylic Latex Paint

Applicable Environment

Cement mortar	Asbestos board	Concrete	Roof

B12-26 Advanced Outdoor Acrylic Latex Paint

Compatibility

	Product	Thickness
Putty :	B51- 1 Architectural Paint Exclusive Putty	1mm
Primer:	B51-2 Advance Acrylic Latex Sealing Primer	0.1mm
Topcoat:	B12-26 Advanced Outdoor Pure Acrylic Latex Paint	0.2mm

B12-26 Advanced Outdoor Acrylic Latex Paint 

Finished Projects

B12-26 Advanced Outdoor Acrylic Latex Paint 

Production Process

B12-26 Advanced Outdoor Acrylic Latex Paint 

Instructions For Use

Substrate Treatment：

Remove all surface contamination by washing with an appropriate cleaner, rinse thoroughly and allow to dry. Scrape and sand peeled or checked paint to a sound surface. Sand glossy surfaces dull. Seal stains from water, smoke, ink,  pencil, grease, etc. with the appropriate primer/sealer.  Recognize that any  surface  preparation  short  of  total  removal  of  the  old  coating  may compromise the service length of the system.

• Stucco

Remove any  loose  stucco,  efflorescence,  or  laitance. Allow  new  stucco to cure at least 30 days before painting. If painting cannot wait 30 days, allow the surface to dry 7 days and prime with Concrete & Masonry Primer. Repair cracks, voids, and other holes with an elastomeric patch or sealant.                    

• Masonry, concrete, cement, block

All     new     surfaces     must     be     cured     according     to    the     supplier’s recommendations—usually  about  30  days.  Remove  all  form  release  and curing agents. Rough surfaces can be filled to provide a smooth surface. If painting cannot wait 30 days, allow the surface to cure 7 days and prime the surface  with  Concrete  &  Masonry  Primer.  Cracks,  voids,  and  other  holes should be repaired with an elastomeric patch or sealant.

Instructions for Use:

Thinner:

DI water or tap water (weight content ≤ 5 %, w./w.).

Cleaner:

DI water or tap water

Application method:

Spraying, conventional spraying, brushing, rolling, troweling.

Spraying: nozzle diameter: 2-3 mm, air pressure: 0.3-0.6 Mpa..

Maintenance period:

7 days.

B12-26 Advanced Outdoor Acrylic Latex Paint 

Company Introduction

B12-26 Advanced Outdoor Acrylic Latex Paint 

Exhibitions