Waterborne Zinc-rich Epoxy Primer

This two-component product is mainly composed of epoxy resin, zinc powder, auxiliaries, waterborne amine curing agent and deionized water.and it has the following outstanding characteristics:

Eco-friendliness

Salt spray resistance

Strong adhesion

Waterborne Zinc-rich Epoxy Primer Video

Waterborne Zinc-rich Epoxy Primer

Basic Technical Datasheet

Color	Gray,
Gloss	Flat
Density	60% Zinc: ~1.95Kg/L (after mixing) 70% Zinc: ~2.30Kg/L (after mixing) 80% Zinc; ~2.4Kg/L (after mixing)
Curing agent	Curing agent for waterborne epoxy paint
Solid Volume	(60±2 )%
Standard Film thickness	80um dry film thickness  (about 133um wet film thickness)
Theoretical spreading rate	3.2m²/Kg (80um dry film thickness, 60% zinc) 2.80m²/Kg (80um dry film thickness, 70% Zinc) 2.70m²/Kg (80um dry film thickness, 80% Zinc)

Waterborne Zinc-rich Epoxy Primer Product Packaging Packaging: part A：20kg in a 20-liter iron bucket. part B：4kg in a 5-liter iron bucket. Shelf Life: Part A：12 months，Part B：12 months If exceeding shelf life, the products shall be tested before using.

Waterborne Zinc-rich Epoxy Primer 

Applicable Environment

Bridges	oil tanks	Ships	Gas storage tanks

Waterborne Zinc-rich Epoxy Primer Compatibility

	Product	Thickness
Primer:	Waterborne Zinc-rich Epoxy Primer	2*40 µm (dry film thickness)
Paint:	Waterborne Epoxy Intermediate Paint	60um (dry film thickness)
Topcoat:	Waterborne Epoxy Finish	2*40 µm (dry film thickness)

Waterborne Zinc-rich Epoxy Primer Finished Projects

 

Waterborne Zinc-rich Epoxy Primer Paint Production Process

Waterborne Zinc-rich Epoxy Primer 

Instructions For Use

Substrate Treatment：

The surface to be coated shall be clean, dry and free from contaminations. Also, the surface shall be evaluated and handled according to ISO8504 standard.

Painted surface: only apply to clean, dry and intact compatible primer.

Instructions for Use:

• Mixing:

Use the power mixer to mix the main paint evenly, and then as you stir it, you add the hardener until you get to mix well.

• Thinner:

Clean water

• Airless spray:

Nozzle tip: 0.025~0.031 inches

Spray pressure: 18~28Mpa

Thinner ratio: 0~10% (by weight of paint)

• Brush、Roller:

Recommended Must achieve required thickness.

Waterborne Zinc-rich Epoxy Primer 

Company Introduction

Waterborne Zinc-rich Epoxy Primer Exhibitions