JB-Epoxy Paint S726
IMS
Matt,Grey
1.06
≥100
24h
Mix part A and part B as 1:1 by weight. Slowly add part B into part A and ensure mixed completely.
Mix part A and part B as 3.24:1 by weight. Slowly add part B into part A and ensure mixed completely.
~1.10
Availability: | |
---|---|
JB-Epoxy Paint S726
JB-Epoxy Paint S726 Product Description
Epoxy paint is mainly prepared by 100% solids epoxy resin and curing agent, with outstanding features as below:
● Good adhesion | ● High mechanical properties |
● Marine-resistant | ● Elastic |
● Long durability | ● Great resistance to impact, Sea water, shock, oil and other chemicals |
● Operating Temperature Limits:-40℉ to +176℉continuous(for short term/infrequent excursions beyond these limits | ● Etc |
| JB-Epoxy Paint S726 Tyipical Uses
This product is mainly used for repairing underwater steel/concrete substrate, Commonly used in industries of:
· Waste water facilities | · Steel pipe, tanks |
· Immersed metal part | · Port facilities |
· Bridges steel | · Etc |
· Offshore structures |
| JB-Epoxy Paint S726 Product Packaging
A:20kg B:20kg
Part A : 20 kg in a 20-liter iron barrel
Part B : 20 kg in a 20-liter iron barrel
Appearance | Matt,Grey |
Volume solid, % | ≥100 |
Density, Kg/L | 1.06 |
Resistance to 10% H2SO4, 10d | No change |
Resistance to 10% NaOH, 10d | No change |
Resistance to 3% salt water, 10d | No change |
Resistance to 45# engine oil, 10d | No change |
Resistance to moisture condensation | No blisters, rust |
Theoretical spreading rate | ~4.3 |
Pot Life, h | 2H at 20 ℃ |
Mixing | Mix part A and part B as 3.05:1 by weight. Slowly add part B into part A and ensure mixed completely |
Thinner | Epoxy paint thinner ≤ 10 % w./w. |
Cleaner | X-7 epoxy paint thinner |
Application methods | Brush, roll, spray |
To touch/H | 3H |
Overcoating Interval | M:3.5H |
Product | Thickness | |
Primer: | JB-Epoxy Paint S726 | 6 mm |
Topcoat: | JB-Topcoat(Aliphatic polyurethane paint) | 100μm |
About Us We are headquartered in Jiangsu, China, established in 2016, and our market reach extends to Southeast Asia (40.00%), Africa (15.00%), Eastern Europe (15.00%), Western Europe (10.00%), the Middle East (10.00%), North America (5.00%), and the Domestic Market (5.00%). Our team comprises approximately 51-100 dedicated professionals.
Ensuring the highest quality is our priority. We achieve this by: Conducting pre-production samples before mass production.
Carrying out thorough final inspections before shipment.
Our product range includes a variety of offerings such as Alkyd Paint, Polyurethane Paint, Epoxy Paint, Acrylic Paint, Organic Silicone Paint, and more.
There are several compelling reasons to opt for our products:We possess a rich 22-year history dedicated to the development, production, and sales of heavy anti-corrosion coatings.
We hold the prestigious designation as the developer for a military unit and are located within the Changzhou state high technology industrialization base for new paint.
Our commitment to quality is underscored by ISO9001, ISO14001, and OHSAS18001 certifications.
We offer the following services:Accepted Delivery Terms: FOB, EXW
Accepted Payment Currency: USD
Accepted Payment Type: T/T
Multilingual Support: English and Chinese
Feel free to reach out to us for all your coating needs, and we will be delighted to assist you.
ROHS
ISO 9001
SRC
CE
· Mixing
Mix part A and part B as 20:4 by weight. Slowly add part B into part A and ensure mixed completely.
· Thinner:
X-10 polyurethane paint exclusive thinner ≤ 10 % w./w.
· Cleaner:
X-10 polyurethane paint exclusive thinner
· Application method:
Airless Spray: Pressure : 1800 - 2700 psi ,Hose: 1/4" ID, Tip:.015" - .021".
Filter: 60 mesh.
Brush :. Nylon / polyester.
Roller:1/4 - 1/2" woven.
· Application process:
Apply certain amount of sealing agent to further smooth surface of substrate with airless spraying or rolling.
Towel two layers of polyurethane slurry (a rough layer followed by a fine the layer) on the surface to required thickness. Before toweling second layer, smooth the first layer by grinding.
Grind the intermediate layer and clean up extra sands or quartz on intermediate layer, thereafter apply finish coat.
IMS Paint, one of famous trademarks in China, devotes to industrial paint research, production and sales since 2001.
Oriented by technology, we serve customers worldwide not only our high quality products, but also technical consultation and engineering scenarios. Cooperating with UNSW and BUCT, We invest millions to update our technology so that we can bring out better and cheaper products.
Our core products, including antirust paint, acid & alkali resisting paint, heat resisting paint, building & floor paint etc., help protect and extend substrate life for years.
JB-Epoxy Paint S726
JB-Epoxy Paint S726 Product Description
Epoxy paint is mainly prepared by 100% solids epoxy resin and curing agent, with outstanding features as below:
● Good adhesion | ● High mechanical properties |
● Marine-resistant | ● Elastic |
● Long durability | ● Great resistance to impact, Sea water, shock, oil and other chemicals |
● Operating Temperature Limits:-40℉ to +176℉continuous(for short term/infrequent excursions beyond these limits | ● Etc |
| JB-Epoxy Paint S726 Tyipical Uses
This product is mainly used for repairing underwater steel/concrete substrate, Commonly used in industries of:
· Waste water facilities | · Steel pipe, tanks |
· Immersed metal part | · Port facilities |
· Bridges steel | · Etc |
· Offshore structures |
| JB-Epoxy Paint S726 Product Packaging
A:20kg B:20kg
Part A : 20 kg in a 20-liter iron barrel
Part B : 20 kg in a 20-liter iron barrel
Appearance | Matt,Grey |
Volume solid, % | ≥100 |
Density, Kg/L | 1.06 |
Resistance to 10% H2SO4, 10d | No change |
Resistance to 10% NaOH, 10d | No change |
Resistance to 3% salt water, 10d | No change |
Resistance to 45# engine oil, 10d | No change |
Resistance to moisture condensation | No blisters, rust |
Theoretical spreading rate | ~4.3 |
Pot Life, h | 2H at 20 ℃ |
Mixing | Mix part A and part B as 3.05:1 by weight. Slowly add part B into part A and ensure mixed completely |
Thinner | Epoxy paint thinner ≤ 10 % w./w. |
Cleaner | X-7 epoxy paint thinner |
Application methods | Brush, roll, spray |
To touch/H | 3H |
Overcoating Interval | M:3.5H |
Product | Thickness | |
Primer: | JB-Epoxy Paint S726 | 6 mm |
Topcoat: | JB-Topcoat(Aliphatic polyurethane paint) | 100μm |
About Us We are headquartered in Jiangsu, China, established in 2016, and our market reach extends to Southeast Asia (40.00%), Africa (15.00%), Eastern Europe (15.00%), Western Europe (10.00%), the Middle East (10.00%), North America (5.00%), and the Domestic Market (5.00%). Our team comprises approximately 51-100 dedicated professionals.
Ensuring the highest quality is our priority. We achieve this by: Conducting pre-production samples before mass production.
Carrying out thorough final inspections before shipment.
Our product range includes a variety of offerings such as Alkyd Paint, Polyurethane Paint, Epoxy Paint, Acrylic Paint, Organic Silicone Paint, and more.
There are several compelling reasons to opt for our products:We possess a rich 22-year history dedicated to the development, production, and sales of heavy anti-corrosion coatings.
We hold the prestigious designation as the developer for a military unit and are located within the Changzhou state high technology industrialization base for new paint.
Our commitment to quality is underscored by ISO9001, ISO14001, and OHSAS18001 certifications.
We offer the following services:Accepted Delivery Terms: FOB, EXW
Accepted Payment Currency: USD
Accepted Payment Type: T/T
Multilingual Support: English and Chinese
Feel free to reach out to us for all your coating needs, and we will be delighted to assist you.
ROHS
ISO 9001
SRC
CE
· Mixing
Mix part A and part B as 20:4 by weight. Slowly add part B into part A and ensure mixed completely.
· Thinner:
X-10 polyurethane paint exclusive thinner ≤ 10 % w./w.
· Cleaner:
X-10 polyurethane paint exclusive thinner
· Application method:
Airless Spray: Pressure : 1800 - 2700 psi ,Hose: 1/4" ID, Tip:.015" - .021".
Filter: 60 mesh.
Brush :. Nylon / polyester.
Roller:1/4 - 1/2" woven.
· Application process:
Apply certain amount of sealing agent to further smooth surface of substrate with airless spraying or rolling.
Towel two layers of polyurethane slurry (a rough layer followed by a fine the layer) on the surface to required thickness. Before toweling second layer, smooth the first layer by grinding.
Grind the intermediate layer and clean up extra sands or quartz on intermediate layer, thereafter apply finish coat.
IMS Paint, one of famous trademarks in China, devotes to industrial paint research, production and sales since 2001.
Oriented by technology, we serve customers worldwide not only our high quality products, but also technical consultation and engineering scenarios. Cooperating with UNSW and BUCT, We invest millions to update our technology so that we can bring out better and cheaper products.
Our core products, including antirust paint, acid & alkali resisting paint, heat resisting paint, building & floor paint etc., help protect and extend substrate life for years.