Aliphatic Polyurethane Finish

This product is based on aliphatic isocyanates and hydroxy resins.It has the following characteristics：

Excellent weather resistance	Solid and firm paint film	High gloss
Resistant to chalking	Good chemical corrosion resistance	Excellent water resistance

Aliphatic Polyurethane Finish Video

Aliphatic Polyurethane Finish Basic Technical Datasheet

Color	Customized
Gloss	High gloss
Density	~1.25Kg/L
Hardness	Aliphatic polyurethane curing agent
Solid Volume	(50±2 )%
Standard Film thickness	60um dry film thickness  (about 120um wet film thickness)
Theoretical spreading rate	6.67m²/Kg (60um dry film thickness)
Full cure	(23℃±2 )7d
Flash Point	33℃

Aliphatic Polyurethane Finish Product Packaging Packaging: part A：20 kg in a 20-liter iron bucket. part B：4 kg in a 5-liter iron bucket. Shelf Life: 12 months If exceeding shelf life, the products shall be tested before using.

Aliphatic Polyurethane Finish Applicable Environment

Wind turbine towers	Petrochemical facilities	External surfaces of storage tanks	Tower cranes
Outdoor guardrails	Topside of offshore platforms	Port machinery	Large‑scale factory steel components

Aliphatic Polyurethane Finish Compatibility

	Product	Thickness
Primer:	Epoxy Zinc Rich Primer	2*60 µm (dry film thickness)
Midcoat:	Epoxy Mica Iron Oxide Intermediate Paint	2*50 µm (dry film thickness)
Topcoat:	Aliphatic Polyurethane Finish	2*30um (dry film thickness)

Aliphatic Polyurethane Finish Finished Projects

Aliphatic Polyurethane Finish Production Process

Aliphatic Polyurethane Finish Instructions For Use

Substrate Treatment：

All surface to be coated shall be clean and dry. The surface shall be evaluated and treated according to ISO8504 standard.

Surface painted coatings:  apply only to clean, dry and good compatible primer. If the primer contains zinc, it has to be fully cured and free from zinc or any other contaminants before re-coating.

Instructions for Use:

• Mixing:

Use the power mixer to mix the main paint evenly, and then as you stir it, you add the hardener until you get to mix well

• Mixing ratio：

Part A: Part B= 20:4 (by weight)

• Thinner:

Polyurethane paint thinner

• Airless spray:

Nozzle tip: 0.017~0.025 inches

Spray pressure: 18~25Mpa

Thinner ratio: 0~15% (by weight of paint)

• Brush、Roller：

Recommended Must achieve required thickness

Aliphatic Polyurethane Finish Company Introduction

Aliphatic Polyurethane Finish Exhibitions