Epoxy Acid-resistant Cement

This product is composed of modified epoxy acid-resistant resin, pigment, drier, acid-resistant filler, organic solvent, etc.It has the following resistance characteristics:

Excellent acid resistance	Superior impermeability	High adhesion
Good wear resistance	Excellent impact resistance	Good workability

Epoxy Acid-resistant Cement Basic Technical Datasheet

Color	Iron oxide red, gray, black, etc.
Gloss	No gloss, semi-gloss
Density	~1.5Kg/L (after mixing)
Hardness	Epoxy acid-resistant cement curing agent
Solid Volume	(80±2 )%
Standard Film thickness	2mm dry film thickness  (about 2500um wet film thickness)
Theoretical spreading rate	0.27m²/Kg (2mm dry film thickness)
Full Cure	(23±2℃) 7d
Flash Point	27℃

Epoxy Acid-resistant Cement Product Packaging Packaging: Part A 20kg in a 20-liter iron bucket. Part B 5kg in a 6-liter iron bucket. Shelf Life: 12 months If exceeding shelf life, the products shall be tested before using.

Epoxy Acid-resistant Cement Applicable Environment

Electroplating Workshop	Sedimentation Tank	Sewage Pipeline	Desulfurization Tower

Epoxy Acid-resistant Cement Compatibility

	Product	Thickness
Primer:	Epoxy Acid-resistant Sealing Primer	30 µm (dry film thickness)
Paint:	Epoxy Acid-resistant Cement	2mm (dry film thickness)
Topcoat:	Acid-resistant Finish	2*100 µm (dry film thickness)

Epoxy Acid-resistant Cement Finished Projects

 

Epoxy Acid-resistant Cement Production Process

Epoxy Acid-resistant Cement 

Instructions For Use

Substrate Treatment：

Before using it on the cement base, the substrate shall be cleaned and without dust and oil. The particles, edges and loose parts of the base floor shall be removed to keep the appearance flat. After the surface treatment, apply one coat of epoxy varnish. Besides, the pits and unevenness shall be repaired with epoxy cement.

Instructions for Use:

• Mixing:

Use the power mixer to mix the main paint evenly, and then as you stir it, you add the hardener until you get to mix well. Generally speaking, if the temperature is below 10 ℃, it needs 30 min induction time; if the temperature is over 10℃, it needs 15 min induction time.

• Mixing Ratio

Part A: Part B = 20:5 (by weight)

• Thinner:

Epoxy paint thinner

• Scraping：

Must reach the required dry film thickness

Epoxy Acid-resistant Cement Company Introduction

Epoxy Acid-resistant Cement Exhibitions